This is Walden Gage’s published calibration price list: 370 line items across dimensional, hard gage, hand tool, and mechanical equipment calibration. Prices are per item unless noted otherwise. Effective January 2025 and still in effect.
Most calibration providers make you call for a number. We publish ours so you can budget a recall cycle, compare against what you are paying now, and build a purchase order without waiting on a quote.
Walden Gage is a gage supply and calibration brokerage, not a calibration laboratory. We do not hold an ISO/IEC 17025 accreditation. Calibration is performed by accredited partner laboratories, and your certificate comes from the lab that did the work, under that lab’s accreditation and scope.
What you get from us is a single point of contact: one purchase order, one contact, one invoice, across instrument types no single lab is scoped to cover. We handle routing, scheduling, recall dates, and certificate collection.
Dimensional calibration verifies, and where required adjusts, the accuracy of instruments that determine physical geometry: length, diameter, angle, flatness, thread pitch. The instrument is compared against traceable dimensional standards such as gage blocks, master rings and plugs, laser interferometers, or optical scales, under controlled environmental conditions. The certificate states the instrument’s error and the associated measurement uncertainty.
| Item | Price |
|---|---|
| Angle Blocks | $15.00 each |
| Angle Gages | $12.00 per leaf (minimum $60.00) |
| Angle Gages (additional tips) | $65.00 each |
| Angle Plates (12 in. or less, two sides) | $70.00 each |
| Angle Plates (over 12 in., two sides) | $115.00 each |
| Angle Plates (extra sides) | $40.00 per side |
| Clinometers | $115.00 each |
| Combination Squares | $85.00 each |
| Crimpers | $70.00 per die |
| Cylindrical Squares | $78.00 each |
| Dies | $15.00 per dimension (minimum $60.00) |
| Dimensional Inspection (First Article) | $230.00 per hour (minimum $100.00) |
| Dimensional Inspection (Fixtures) | $230.00 per hour (minimum $100.00) |
| Dimensional Inspection (Functional Gages) | $230.00 per hour (minimum $100.00) |
| Dimensional Inspection (Overlays) | $230.00 per hour (minimum $100.00) |
| Dimensional Inspection (Visual Inspection) | $230.00 per hour (minimum $100.00) |
| Hex Plugs (Standard) | $33.00 each member |
| Hex Plugs (addition of corner to corner) | $66.00 each member |
| Hex Plugs (addition of profile) | $171.00 each member |
| Hex Plugs (addition of true position) | $66.00 each member |
| Hexalobular Gages | $63.00 each member |
| Hole Gages | $48.00 each |
| Inclinometers | $115.00 each |
| Kalmasters (0 to 6 in.) | $115.00 each |
| Kalmasters (over 6 to 12 in.) | $190.00 each |
| Kalmasters (12 to 30 in.) | $265.00 each |
| Kalmasters (over 30 in.) | $340.00 each |
| Laser Distance Meters | $70.00 each |
| Level (including laser) | $118.00 each |
| Levels | $48.00 each |
| Luer Taper Gages | $78.00 each |
| Parallels (0 to 8 in.) | $27.00 each |
| Parallels (over 8 in.) | $39.00 each |
| Pi Tapes (0 to 24 in.) | $100.00 each |
| Pi Tapes (25 to 60 in.) | $115.00 each |
| Pi Tapes (61 to 120 in.) | $228.00 each |
| Pi Tapes (121 to 180 in.) | $340.00 each |
| Pi Tapes (181 to 240 in.) | $528.00 each |
| Protractors (Standard) | $48.00 each |
| Protractors (includes center) | $66.00 each |
| Protractors (includes laser) | $118.00 each |
| Protractors (includes level) | $96.00 each |
| Protractors (includes ruler) | $48.00 each plus ruler price |
| Radius Gages | $10.00 each (minimum $80.00) |
| Recess Penetration Gages | $138.00 each |
| Reference Specimen | $40.00 per patch |
| Reticles (1 to 3 scales) | $78.00 each |
| Reticles (more than 3 scales) | $153.00 each |
| Rulers (0 to 12 in., up to 4 scales) | $33.00 each |
| Rulers (13 to 48 in., up to 4 scales) | $48.00 each |
| Rulers (49 to 96 in., up to 4 scales) | $63.00 each |
| Rulers (over 96 in., up to 4 scales) | $78.00 each |
| Rulers (more than 4 scales) | Double the above prices |
| Rulers (with additional inspections) | Add $48.00 each |
| Scale Lupes (1 to 3 patterns) | $78.00 each |
| Scale Lupes (more than 3 patterns) | $153.00 each |
| Sieves | $153.00 each |
| Sine Bars and Plates (Compound) | $123.00 each |
| Sine Bars and Plates (Standard) | $63.00 each |
| Slot Gages | $40.00 each |
| Spline Plugs and Rings | $78.00 each |
| Squares (0 to 18 in.) | $48.00 each |
| Squares (over 18 in.) | $63.00 each |
| Squares (with ruler) | $48.00 each plus ruler price |
| Stage Micrometers | $78.00 each |
| Straight Edges (0 to 12 in.) | $33.00 each |
| Straight Edges (13 to 48 in.) | $48.00 each |
| Straight Edges (49 to 96 in.) | $63.00 each |
| Straight Edges (over 96 in.) | $78.00 each |
| Surface Roughness Standard (individual) | $40.00 per patch |
| Surface Roughness Standard (set of 3) | $70.00 per patch |
| Surface Roughness Standard (set of more than 3) | $18.00 per patch |
| Tape Measures (0 to 16 ft.) | $36.00 each |
| Tape Measures (17 to 25 ft.) | $55.00 each |
| Tape Measures (26 to 100 ft.) | $78.00 each |
| Tape Measures (over 100 ft.) | $115.00 each |
| Taper Gages (Rings and Plugs) | $63.00 each |
| Tapered Rulers | $63.00 each |
| Tapered Thickness Gages | $63.00 each |
| Thread Micrometer Masters | $25.00 each |
| Thread Pitch Gages (Screw Pitch) | $12.00 each (minimum $60.00 per set) |
| Tri Roll Gages | $57.00 each |
| V Blocks | $48.00 per side |
| Weld Fillet Gages (Adjustable) | $130.00 each |
| Weld Fillet Gages (Leaf Style) | $10.00 per leaf (minimum $65.00) |
| Wire Gages | $130.00 each |
Hard gage calibration covers fixed-limit or attribute gages: solid, non-adjustable reference artifacts such as plug, ring, thread, pin, and snap gages that give a GO / NO-GO decision rather than a numerical reading. This is the category most quality departments have the most of, and the one most often behind on its recall dates.
| Item | Price |
|---|---|
| 1-2-3 Blocks and 2-4-6 Blocks | $33.00 each member |
| Calibration Balls and Spheres | $18.00 each |
| Calibration Balls and Spheres (roundness with inspection) | $51.00 each |
| Calibration Balls and Spheres (with weight calibration) | $51.00 each |
| Concentricity Gages | $25.00 each |
| Crest Check Gages | $33.00 each |
| Cylindrical Plugs (0 to 8.000 in.) | $10.00 each member |
| Cylindrical Plugs (8.001 to 12.000 in.) | $15.00 each member |
| Cylindrical Plugs (12.001 to 39.000 in.) | $27.00 each member |
| Cylindrical Plugs (Class XXX and XX) | Add $5.00 to the above prices |
| Cylindrical Rings (0.020 to 0.500 in.) | $21.00 each |
| Cylindrical Rings (0.501 to 8.000 in.) | $16.00 each |
| Cylindrical Rings (8.001 to 12.000 in.) | $33.00 each |
| Cylindrical Rings (12.001 to 22.000 in.) | $48.00 each |
| Cylindrical Rings (Class XXX and XX) | Add $12.00 to the above prices |
| Deltronic Pin Gages and Plug Gages | $10.00 each pin |
| Depth Master (Leitech) | $115.00 each |
| Depth Mikemaster | $18.00 each step (minimum $200.00) |
| Feeler Gages | $7.00 each (minimum $50.00) |
| Gage Blocks (under 4 in.) | $5.00 per block |
| Gage Blocks (over 4 in.) | $5.00 per inch |
| Gage Blocks (individual serialization) | Add $3.00 per block |
| Gage Blocks (individual certificate) | Add $7.00 per block |
| Gear Wires | $10.00 per wire (minimum $24.00) |
| Length Standards (0 to 11 in.) | $13.00 each |
| Length Standards (12 to 24 in.) | $33.00 each |
| Length Standards (25 to 60 in.) | $3.00 per inch |
| Masterdiscs (0 to 8.000 in.) | $15.00 each member |
| Masterdiscs (8.001 to 12.000 in.) | $16.00 each member |
| Masterdiscs (12.001 to 39.000 in.) | $30.00 each member |
| Masterdiscs (Class XXX and XX) | Add $5.00 to the above prices |
| Mikemasters | $18.00 each step (minimum $100.00) |
| Optical Flats (0 to 4 in.) | $48.00 each |
| Pin Gages (Class ZZ) | $2.00 per pin |
| Pin Gages (Class Z and special tolerance) | $2.50 per pin |
| Pin Gages (Class X) | $5.00 per pin |
| Pin Gages (individual certificates) | $9.00 per pin |
| Pin Gages (individual dipping) | Add $2.00 to the above prices |
| Spacer Blocks | $10.00 each (minimum $20.00) |
| Spiralock Gages | $78.00 per member |
| Tapered Thread Gages (BSPT Plugs, 0 to 2 in.) | $33.00 per member |
| Tapered Thread Gages (BSPT Plugs, over 2 in.) | $40.00 per member |
| Tapered Gages (NPT/NPTF Plugs and Rings, 0 to 2 in.) | $25.00 each |
| Tapered Gages (NPT/NPTF Plugs and Rings, over 2 in.) | $40.00 each |
| Telescope Gages | $18.00 each (minimum $100.00) |
| Thickness Standards | $12.00 each (minimum $48.00) |
| Thread and Set Plugs (BSPP, ACME and Buttress) | $33.00 per member |
| Thread and Set Plugs (UN Series and Metric, 0 to 6 in.) | $12.00 per member |
| Thread and Set Plugs (UN Series and Metric, over 12 in.) | $25.00 per member |
| Thread Plugs (Leitech, 0 to 2 in.) | $48.00 each |
| Thread Plugs (Leitech, Master) | $115.00 each |
| Thread Rings (BSPP, ACME and Buttress, 0 to 2 in.) | $51.00 each, all pitch diameters |
| Thread Rings (BSPP, ACME and Buttress, 2.001 to 4 in.) | $55.00 each, all pitch diameters |
| Thread Rings (BSPP, ACME and Buttress, 4.001 to 6 in.) | $60.00 each, all pitch diameters |
| Thread Rings (BSPP, ACME and Buttress, over 6 in.) | $75.00 each, all pitch diameters |
| Thread Rings (UN Series and Metric, 0 to 2 in.) | $19.00 each, standard pitch diameters |
| Thread Rings (UN Series and Metric, non-standard pitch diameters) | Add $40.00 each |
| Thread Rings (UN Series and Metric, 2.001 to 4 in.) | $61.00 each |
| Thread Rings (UN Series and Metric, 4.001 to 6 in.) | $64.00 each |
| Thread Rings (UN Series and Metric, over 6 in.) | $79.00 each |
| Thread Wires | $10.00 each wire (minimum $25.00) |
Hand tool calibration covers portable, operator-held instruments that produce a quantitative reading: micrometers, calipers, indicators, height gages, bore gages, and similar. Calibration confirms the tool’s indications agree with traceable reference standards within a stated uncertainty, so measurements recorded on the shop floor are valid for product acceptance.
| Item | Price |
|---|---|
| Air Columns | $93.00 each scale |
| Air Gages | $93.00 each scale |
| Bench Centers | $145.00 each scale |
| Bore Gage Calibrator | $115.00 each |
| Bore Gages | $40.00 each |
| Bore Gages (additional heads) | $40.00 each |
| Calipers (dial, depth, digital, vernier, 0 to 8 in.) | $24.00 each |
| Calipers (dial, depth, digital, vernier, 9 to 18 in.) | $33.00 each |
| Calipers (dial, depth, digital, vernier, 19 to 48 in.) | $48.00 each |
| Calipers (dial, depth, digital, vernier, over 48 in.) | $78.00 each |
| Calipers (ID and OD) | $33.00 each |
| Center Finders | $40.00 each |
| Center Finders (additional rods) | $10.00 each |
| Chamfer Gages | $40.00 each |
| Comtorgage | $63.00 each |
| Countersink Gages | $40.00 each |
| Depth Gages | $25.00 each |
| Depth Gages (additional rods) | $10.00 each |
| Edge Finders | $115.00 each |
| Gage Amplifiers and Probe (up to 2 channels, 1 probe) | $130.00 each |
| Gage Amplifiers (additional channels) | $33.00 each |
| Gage Amplifiers (additional probes) | $33.00 each |
| Groove Gages | $40.00 each |
| Height Gages (0 to 18 in.) | $55.00 each |
| Height Gages (19 to 24 in.) | $85.00 each |
| Height Gages (over 24 in.) | $115.00 each |
| Height Gages (0.0004 in. accuracy or greater) | Add $175.00 to the above prices |
| Height Riser | $55.00 each |
| Height Set Masters (Cadillac Gages, 0 to 12 in.) | $198.00 each |
| Height Set Masters (Cadillac Gages, 13 to 24 in.) | $303.00 each |
| Height Set Masters (Cadillac Gages, 15 to 40 in.) | $453.00 each |
| Height Standard | $55.00 each |
| Indicator Calibrators | $115.00 each |
| Indicators (Co-Ax) | $70.00 each |
| Indicators (dial, digital, test) | $24.00 each |
| Lead Gages | $240.00 each |
| Linear Scales (0 to 8 in.) | $48.00 each axis |
| Linear Scales (9 to 18 in.) | $63.00 each axis |
| Linear Scales (19 to 48 in.) | $93.00 each axis |
| Linear Scales (49 to 80 in.) | $153.00 each axis |
| Linear Scales (81 to 96 in.) | $243.00 each axis |
| Linear Scales (over 96 in.) | $340.00 each axis |
| Micrometers (standard anvils, 0 to 6 in.) | $24.00 each |
| Micrometers (standard anvils, 7 to 12 in.) | $33.00 each |
| Micrometers (standard anvils, 13 to 24 in.) | $48.00 each |
| Micrometers (standard anvils, 25 to 48 in.) | $70.00 each |
| Micrometers (standard anvils, over 48 in.) | $138.00 each |
| Micrometers (Bench) | $145.00 each |
| Micrometers (depth, micrometer head) | $33.00 each |
| Micrometers (inside, includes 1 head and 8 rods, 0 to 12 in.) | $100.00 per set |
| Micrometers (inside, 13 to 32 in.) | $130.00 per set |
| Micrometers (inside, 33 to 48 in.) | $160.00 per set |
| Micrometers (inside, 49 to 96 in.) | $190.00 per set |
| Micrometers (inside, over 96 in.) | $303.00 per set |
| Micrometers (inside, additional heads) | $27.00 each head |
| Micrometers (inside, additional rods) | $12.00 each rod |
| Micrometers (Laser) | $228.00 each |
| Micrometers (outside, multi-anvil, 0 to 18 in.) | $24.00 per anvil |
| Micrometers (outside, multi-anvil, 19 to 36 in.) | $34.00 per anvil |
| Micrometers (outside, multi-anvil, 37 to 48 in.) | $55.00 per anvil |
| Micrometers (outside, multi-anvil, 49 to 54 in.) | $66.00 per anvil |
| Micrometers (outside, multi-anvil, over 54 in.) | $76.00 per anvil |
| Micrometers (pitch / screw thread, 0 to 6 in.) | $33.00 each |
| Micrometers (pitch / screw thread, 7 to 12 in.) | $48.00 each |
| Micrometers (pitch / screw thread, additional anvils) | $10.00 each |
| Micrometers (Pressure) | $40.00 each |
| Micrometers (Super) | $303.00 each |
| Snap Gage Calibration | $42.00 each |
| Snap Gage Lapping | $153.00 each |
| Snap Gage Adjustments | $63.00 each |
| Thickness Gages | $34.00 each |
| Toolsetters | $40.00 each |
| Tru Position Gages | $78.00 each |
Mechanical equipment covers inspection and test instruments whose sensing and indication depend on movement, deformation, or physical contact rather than electronic sensors. Typical quantities include mass, force, torque, pressure, hardness, flatness, and vibration.
| Item | Price |
|---|---|
| Backflow Preventers (0.090% accuracy or lesser) | $111.00 each |
| Backflow Preventers (0.089% accuracy or greater) | $190.00 each |
| Balances (0 to 500 lbs.) | $85.00 each platform |
| Balances (501 to 1,000 lbs.) | $160.00 each platform |
| Balances (1,001 to 3,000 lbs.) | $228.00 each platform |
| Balances (3,001 to 5,000 lbs.) | $303.00 each platform |
| Barometers (0.251% accuracy or lesser) | $168.00 each |
| Barometers (0.250% accuracy or greater) | $340.00 each |
| Bore Gauges | $25.00 each |
| Brinell Scopes (Analog) | $78.00 each |
| Brinell Scopes (Digital) | $190.00 each |
| Calipers | $10.00 each |
| Compound Gage (pressure and vacuum) | $108.00 each |
| Crane Scales (0 to 100 lbs.) | $78.00 each |
| Crane Scales (101 to 1,000 lbs.) | $198.00 each |
| Crane Scales (1,001 to 10,000 lbs.) | $303.00 each |
| Crane Scales (10,001 to 30,000 lbs.) | $603.00 each |
| Crane Scales (30,001 to 100,000 lbs.) | $753.00 each |
| Deadweight Testers | $903.00 each range or piston |
| Dial Indicators | $16.00 each |
| Durometer Calibrator | $228.00 each |
| Durometer Test Blocks | $33.00 each |
| Durometers (A and D type) | $85.00 per type |
| Durometers (indentor checks) | Add $33.00 each |
| Dynamometers (0 to 1,000 lbs.) | $198.00 each |
| Dynamometers (1,001 to 10,000 lbs.) | $330.00 each |
| Dynamometers (10,001 to 30,000 lbs.) | $603.00 each |
| Dynamometers (30,001 to 100,000 lbs.) | $753.00 each |
| Force Gauges (0 to 100 lbs.) | $78.00 each |
| Force Gauges (101 to 1,000 lbs.) | $198.00 each |
| Force Gauges (1,001 to 10,000 lbs.) | $303.00 each |
| Force Gauges (10,001 to 30,000 lbs.) | $603.00 each |
| Force Gauges (30,001 to 100,000 lbs.) | $753.00 each |
| Foundry / Sand Testing: AFS Clay Tester | $70.00 each |
| Foundry / Sand Testing: Moisture Tellers | $100.00 each |
| Foundry / Sand Testing: Permmeter | $115.00 each |
| Foundry / Sand Testing: Sand Rammer | $228.00 each |
| Foundry / Sand Testing: Sand Squeezers | $228.00 each |
| Foundry / Sand Testing: Sand Strength Tester | $265.00 each |
| Foundry / Sand Testing: Ultrasonic Cleaners | $190.00 each |
| Graduated Cylinders and Flasks | $85.00 each |
| Hardness Testers: Brinell | $228.00 each |
| Hardness Testers: Brinell (additional scales) | $115.00 each |
| Hardness Testers: Brinell Proving Ring | $228.00 each |
| Hardness Testers: Green | $70.00 each |
| Hardness Testers: Impressor | $190.00 each |
| Hardness Testers: Microhardness, Knoop | $303.00 each |
| Hardness Testers: Microhardness, Vickers | $303.00 each |
| Hardness Testers: Microhardness (additional loads) | $153.00 each |
| Hardness Testers: Plastometer | $228.00 each |
| Hardness Testers: Rockwell (includes one scale) | $190.00 each |
| Hardness Testers: Rockwell (additional scales) | $78.00 each |
| Heat Sealers (Standard) | $250.00 each |
| Heat Sealers (with temperature controllers) | $403.00 each |
| Height Gauges | $18.00 each |
| Hygrometers | $168.00 each |
| Leak Testers (Standard) | $190.00 each transducer |
| Load Cells (0 to 1,000 lbs.) | $198.00 each |
| Load Cells (1,001 to 10,000 lbs.) | $333.00 each |
| Load Cells (10,001 to 30,000 lbs.) | $603.00 each |
| Load Cells (30,001 to 100,000 lbs.) | $753.00 each |
| Load Cells (both directions) | Double the above prices |
| Manometers (0.1% accuracy or lesser) | $108.00 each |
| Manometers (0.05% to 0.1% accuracy) | $190.00 each |
| Manometers (0.04% accuracy or greater) | $340.00 each |
| Microscopes (calibration) | $115.00 each |
| Microscopes (clean and PM only) | $63.00 each |
| Microscopes (with video) | $228.00 each |
| Microscopes (Toolmaker’s) | $153.00 each |
| Moisture Balances (Standard) | $303.00 each |
| Optical Comparators | $35.00 each |
| Optical Comparators (additional lenses) | $220.00 each |
| Pin Gauges | $15.00 each |
| Pipettes (10 to 100 microliters) | $115.00 one channel |
| Pipettes (over 100 microliters) | $85.00 one channel |
| Pipettes (additional channels) | $48.00 each channel |
| Pressure Calibrators (0.021% accuracy or lesser) | $415.00 each |
| Pressure Calibrators (0.020% accuracy or greater) | Quoted on request |
| Pressure Calibrators (full scale range 15,000 psi or greater) | Add $153.00 to the above |
| Pressure Controllers (0.021% accuracy or lesser) | $340.00 each |
| Pressure Controllers (0.020% accuracy or greater) | Quoted on request |
| Pressure Controllers (full scale range 15,000 psi or greater) | $493.00 each |
| Pressure Gages (1.00% accuracy or lesser) | $40.00 each |
| Pressure Gages (0.200% to 0.999% accuracy) | $108.00 each |
| Pressure Gages (0.050% to 0.199% accuracy) | $190.00 each |
| Pressure Gages (0.049% accuracy or greater) | $340.00 each |
| Pressure Gages (full scale range 15,000 psi or greater) | Add $153.00 to the above |
| Pressure Modules (0.041% accuracy or lesser) | $190.00 each |
| Pressure Modules (0.040% accuracy or greater) | $340.00 each |
| Pressure Modules (full scale range 15,000 psi or greater) | Add $153.00 to the above |
| Pressure Monitors (0.021% accuracy or lesser) | $340.00 each |
| Pressure Monitors (0.020% accuracy or greater) | Quoted on request |
| Pressure Monitors (full scale range 15,000 psi or greater) | Add $153.00 to the above |
| Pressure Switches (0.200% accuracy or lesser) | $130.00 each |
| Pressure Switches (0.041% to 0.190% accuracy) | $190.00 each |
| Pressure Switches (0.040% accuracy or greater) | $340.00 each |
| Pressure Switches (full scale range 15,000 psi or greater) | Add $153.00 to the above |
| Pressure Transducers (0.200% to 0.999% accuracy) | $130.00 each |
| Pressure Transducers (0.050% to 0.199% accuracy) | $190.00 each |
| Pressure Transducers (0.049% accuracy or greater) | $340.00 each |
| Pressure Transducers (full scale range 15,000 psi or greater) | Add $153.00 to the above |
| Profile Projectors | $32.00 each |
| Roundness Testers | $378.00 each |
| Scales (0 to 500 lbs.) | $85.00 each platform |
| Scales (501 to 1,000 lbs.) | $160.00 each platform |
| Scales (1,001 to 3,000 lbs.) | $228.00 each platform |
| Scales (3,001 to 5,000 lbs.) | $303.00 each platform |
| Sharp Edge Testers | $70.00 each |
| Spring Testers (0 to 100 lbs.) | $78.00 each |
| Spring Testers (101 to 1,000 lbs.) | $198.00 each |
| Spring Testers (1,001 to 10,000 lbs.) | $303.00 each platform |
| Spring Testers (10,001 to 30,000 lbs.) | $603.00 each |
| Spring Testers (30,001 to 100,000 lbs.) | $753.00 each |
| Spring Testers, Torsion (0 to 599 ft-lbs.) | $190.00 each |
| Spring Testers, Torsion (600 to 2,000 ft-lbs.) | $303.00 each |
| Surface Plates | $30.00 each |
| Tensile Testers (0 to 1,000 lbs.) | $265.00 each load cell |
| Tensile Testers (1,001 to 5,000 lbs.) | $340.00 each load cell |
| Tensile Testers (5,001 to 10,000 lbs.) | $528.00 each load cell |
| Tensile Testers (compression tests) | $115.00 each load cell |
| Tensile Testers (displacement test) | $190.00 each load cell |
| Tensile Testers (speed tests) | $190.00 each load cell |
| Tension Meter (Belt) | $115.00 each |
| Tension Meter (Cable) | $228.00 each |
| Tension Meter (Wire) | $115.00 each |
| Thermohygrometers (Standard) | $190.00 each |
| Thermohygrometers (non-standard test points) | Add $190.00 each |
| Thermometers (Bi-Metal) | $78.00 each |
| Thermometers (Digital) | $100.00 each |
| Thermometers (Glass) | $78.00 each |
| Thread Gauges | $22.00 each |
| Torque Drivers (rotary, air, 0 to 75 ft-lbs.) | $55.00 each setting |
| Torque Drivers (rotary, electric, 0 to 75 ft-lbs.) | $55.00 each setting |
| Torque Limiters (0 to 100 ft-lbs.) | $40.00 each |
| Torque Multipliers | $228.00 each |
| Torque Screwdrivers (0 to 100 ft-lbs.) | $55.00 each |
| Torque Testers / Transducers / Analyzers (0 to 599 ft-lbs.) | $190.00 each transducer |
| Torque Testers / Transducers / Analyzers (600 to 2,000 ft-lbs.) | $303.00 each transducer |
| Torque Wrenches (0 to 100 ft-lbs.) | $40.00 each |
| Torque Wrenches (101 to 250 ft-lbs.) | $55.00 each |
| Torque Wrenches (601 to 1,000 ft-lbs.) | $115.00 each |
| Torque Wrenches (1,001 to 2,000 ft-lbs.) | $228.00 each |
| Universal Length Measuring Machine (ULM) | $1,500.00 each |
| Vacuum Gages (Standard) | $66.00 each |
| Vacuum Gages (Micron) | $153.00 each |
| Vernier Gauges | $12.00 each |
| Weights (0 to 6 kg / 13.2 lbs., up to class 4) | $33.00 each |
| Weights (6.1 to 30 kg / 66.1 lbs., up to class 4) | $63.00 each |
| Weights (30.1 to 61 kg / 134 lbs., up to class 4) | $78.00 each |
| Wire Pull Testers | $190.00 each |
Ship all calibration and repair work to Walden Gage Calibration Services, care of our partner laboratory. Addressing it this way is what lets the lab identify your shipment as ours and route it correctly, so please use this exact format:
Walden Gage Calibration Services
Attn: Ray Lamitola
3114 Medalist Dr
Oshkosh, WI 54902
This is a partner laboratory facility, not a Walden Gage location. Our office is in Lancaster, New Hampshire.
Questions, quotes, and everything else go to Walden Gage directly:
Walden Gage Distribution & Calibration Services
22 Woodcrest Ln
Lancaster, NH 03584
631-729-6216
Sales@waldengage.com
No. Walden Gage is a brokerage. We do not hold an ISO/IEC 17025 accreditation and do not perform calibration in house. Work is performed by accredited partner laboratories, and the certificate you receive comes from the lab that performed it, under that lab’s accreditation and scope. If your quality system requires accreditation documentation for a specific instrument, we will tell you which lab is doing the work and provide that lab’s certificate and scope before you place the order.
Because no single accredited lab is scoped for everything in a typical gage crib. A quality department with a few hundred instruments usually ends up with four or five lab relationships, four or five sets of due dates, and no single view of what is current. We carry that coordination so your team does not have to.
Yes. The list covers common items at published prices. Obsolete, custom, and specialty instruments are quoted individually, and sourcing hard-to-find gaging is a large part of what we do.
Yes. Every certificate we return is an accredited certificate, issued by the accredited laboratory that performed the work, under that lab’s scope. There is no non-accredited option and no surcharge for accreditation.
Yes. Repair is available through the same partner network, along with new equipment sales.
Send a list of what you have to Sales@waldengage.com, or call 631-729-6216. A spreadsheet export from your existing gage management system is fine.
Send your instrument list to Sales@waldengage.com or call 631-729-6216. If you would rather work from the printable version, the full price guide is also available as a PDF.
At Walden Gage, we are more than a supplier—we're your dedicated ally in achieving unparalleled accuracy and efficiency in precision measurement. With over 20 years of hands-on experience in the manufacturing industry, we specialize in delivering custom and complex fixed limit gauging solutions alongside ISO/IEC 17025-accredited calibration services. Our mission is to simplify your quality assurance processes by connecting you with the industry's most reliable tools and resources, ensuring your operations run smoothly without the hassle of vendor hunting or compliance worries. Whether you're dealing with intricate part geometries o
